1. Usage and characteristics
JJ-4 six-link in-phase electric stirrer is improved according to domestic
and foreign similar products. This instrument has six stirring heads and
was driven by pulley. They can work at the same time, which can save
time, and improve the working efficiency. About the electric machinery,
advanced permanent magnetism direct current motor is selected, and
energizing and timing line is matched, so it is of low rotary speed, big
torsion, stable rotary, no noise adjustable speed and continuously used etc.
The muddler is made of stainless steel, resistant to corrosion. The lift type
of worktable can be adjusted, it is very convenient to operate. It also has
characteristics of timing, illumination and digital speed etc. The
instruments are extensively used in some collages, environment
protection,Hygiene and control, medicine, metallurgy, chemistry, and
food.2. Main technical index
Power:220V 50Hz
Timing scope:0-999 minutes or open often
Rotary speed of stirring:0-2000 rotates/minute (digital, speed variation)
Power of electric machinery:200W
Working method: continuous(with illustration)
3. Using methods
While using the instrument, first keep the stirring vessel flat on the
worktable, the loose the orient but to adjust the height of worktable to suit
place, tight it keep the switch to "ON", Turn the timing knob on, then the
instrument starts running, Rotate the knob for speed control to adjust the
rotary speed of the muddler (the speed will increase while clockwise,
decease while anticlockwise). Rotate the timing knob to relative scale if
needing timing, If not, keep the knob to "ON", Keep the knob of
illustration to "ON" TO TURN ON THE LIGHT.
4. Precautions
Use three-eve outlet and grounded while using to ensure your personal
safety.
The stirring speed should be adjusted form low to high till to required
speed.
Keep the instrument clean. Do not let the solution into the instrument,
which will effect the using life.